1. The LED street lamp is made of high-quality aluminum alloy material. The surface of the lamp body is sprayed and the surface should be able to withstand mechanical pressure and salt spray, automobile exhaust gas and corrosion of cleaning agent.

2. LED street lamp enclosure protection grade: IP65 or above.

3, good batwing design, reflective system using stereo light source or lens light guide design, the lens must use non-imaging secondary optical lens to ensure road surface brightness and uniformity, increase the radiation range.

4. LED lamps must pass the inspection of the provincial LED street lamp product evaluation benchmarking system and provide inspection reports (LED lamps must be used by bidders for the products of the LED products)

5. The ambient temperature of LED street lamps should be -20 °C ~ +50 °C, and should meet other special requirements such as ambient temperature, humidity and corrosiveness of the specific place of use.

6, the power factor of LED lamps: ≥ 0.95, luminaire drive power efficiency ≥ 90%.

7. LED street lamp working AC voltage range: 85V ~ 265V (LED lamps can still work normally in this voltage range)

8, LED street light has surge suppression performance (anti-lightning), input over-voltage protection, when the voltage returns to normal can resume work.

9. LED street light fixtures must have the function of automatically adjusting the power of the lamps in the middle of the night.

10. The luminaire needs to have an elevation angle adjustment function to ensure the illuminance effect of the road surface to the maximum area.

Zhongshan Xiuben Lighting Co.,Ltd. (Xiuben Lighting) was established in 2008,a registered trademark of "DONTA" and "XIUBEN.Specializes in supplying solar street lights, all in one solar led street light,solar wall lights, led street lights, led flood lights, led high bay light.